Xerox PHASER 8500 Service Manual page 154

General Troubleshooting
4-24
Paper Lead Edge Times (Continued)
R# Definition
Common
5 Stage Interval (us)
6 Transfix Interval
(us)
7 Exit Interval (us)
Simplex Path
8 Exited Interval (us)
Paper is picked and moved through either the simplex or duplex paper path to
determine the paper trailing edge arrival time at each paper path sensor. R
values have alternate definitions or are unused depending on the pick tray
and if simplex or duplex path was selected.
Paper Trail Edge Times
Typical
Value
R# Definition (8400)
Common
0 Tray
1 Paper Size
Typical
Typical Value
Value (8500/
(8400) 8550/8560) Actions
Typical
Value (8500/
8550/8560)
Phaser 8400/8500/8550/8560 Color Printer Service Manual
Reports the interval from the
time the engine software is
commanded to start the stage
process until the Preheat
sensor activates. (part way
through the stage paper
motion).
Reports the interval from the
time the engine software is
commanded to start the
transfix process until the Strip
sensor activates. (part way
through the paper transfix
motion).
Reports the interval from the
time the engine software is
commanded to start the
transfix process until the Exit
sensor activates (part way
through the paper transfix
motion).
Reports the interval from the
time the engine software is
commanded to start the exit
process until the Exit sensor
deactivates.
Actions
Reports the tray from which
the test paper was picked.
Reports the picked media size.