Xerox PHASER 8500 Service Manual page 137

Phaser 8400/8500/8550/8560 Color Printer Service Manual
Service Diagnostics Menu Map (Continued)
Menu
Exercise Menu Functions for causing mechanical actions which may then
be observed. Press a Control Panel button to stop the test
Activators Menu
Exercise All
Tray 1 Pick Solenoid Cycles the activator repeatedly.
Tray 2 Pick Clutch
Tray 3 Pick Clutch
Tray 4 Pick Clutch
Deskew Clutch
Pre-heater Solenoid
(8500/8550/8560)
Strip Solenoid
Tilt Solenoid (8500/
8550/8560)
Head Maintenance
Clutch
Purge Vent Solenoid Cycles the activator repeatedly.
110V/220V Drum
Heater Relay(s)
Exercise Motors/Shafts These functions drive the motor or shaft to generate
Menu observed motion without making substantial change to the
printer's state. Press a Control Panel button to stop the test.
Exercise All
Process Motor
Y-Axis Motor
X-Axis Motor
Purge Pump Motor
Drum Fan Motor
Media Path Motor
Fan Motor
Media Path Motor &
Shafts
Transfix Cam Shaft
General Troubleshooting
Description
Pulses the activator to cause it to
generate some sound or motion.
Cycles each of the listed activators 4
times in sequence.
Cycles the activator repeatedly.
Cycles the activator repeatedly. If
not installed generates an "Option
not detected" message.
Cycles the activator repeatedly. If
not installed generates an "Option
not detected" message.
Cycles the activator repeatedly.
Cycles the Preheater Solenoid.
Cycles the activator repeatedly.
Cycles the Head Tilt Solenoid.
Cycles the activator repeatedly.
Cycles the activator repeatedly.
Cycles each of the listed motors/
shafts 3 times in sequence.
Cycles the motor/shaft repeatedly.
4-7