Phaser 8400/8500/8550/8560 Color Printer Service Manual
9.
Disconnect the heater harness and free the harness from its restraint.
Cable Restraint
Heater Cable
Heater Harness Plug
Ground Strap (8500/8550/8560 Only)
10.
Lift the Printhead out of its mounting position and place the shaft ends in
the cradle notches near the top of the chassis frame.
11.
Disconnect the data cable from the Printhead.
Finger Holes
Flex Cable
Flex Cable (8400 Only)
Data Cable
EMI Tape
(8500/8550/8560)
Cradle Notches
Service Parts Disassembly
Cradle Notch
s8500-077
s8500-078
8-13