Xerox PHASER 8500 Service Manual page 160

General Troubleshooting
4-30
Paper is picked and moved through either the duplex paper path to determine
the paper trailing edge bounce interval at each paper path sensor. R values
have alternate definitions or are unused depending on the pick tray and if
simplex or duplex path was selected.
Duplex Paper Sensor Bounce Times
R# Definition
7 Exit Bounce
Interval (us)
8 Duplex Deskew
Bounce Interval
(us)
9 Duplex Preheat
Bounce Interval
(us)
10 Duplex Strip
Bounce Interval
(us)
11 Duplex Exit Bounce
Interval (us)
Typical
Typical Value
Value (8500/
(8400) 8550/8560) Actions
Phaser 8400/8500/8550/8560 Color Printer Service Manual
Reports the interval during
which the Exit sensor bounces
following the passage of the
paper trailing edge during
duplex turnaround.
Reports the interval during
which the Deskew sensor
bounces following the passage
of the paper trailing edge.
Reports the interval during
which the Preheat sensor
bounces following the passage
of the paper trailing edge.
Reports the interval during
which the Strip sensor
bounces following the passage
of the paper trailing
Reports the interval during
which the Exit sensor bounces
following the passage of the
paper trailing edge.