Tray 1 Paper Take-Up Solenoid (Sl1) - Xerox Phaser 6120 Service Manual

Tray 1 Paper Take-up Solenoid (SL1)

1. Remove the High Voltage Unit. See
2. Remove one screw [1], unlock the tab [2], and release the wiring harness from the
saddle [3]. Then, remove the shield [4].
Caution: When reinstalling the shield, make sure that no part of the harness is wedged in
the mechanism.
3.
Remove the screw [5] and the Tray1 Paper Take-up Solenoid [6].
Phaser® 6120 Color Laser Printer Service Manual
Disassembly/Assembly Procedures
High Voltage Unit (HV)
[1] [2]
[3] [4]
4139fs2030c1
[5] [6]
4139fs2050c0
5-32
on page 5-17.