Cessna TURBO CENTURION T210M 1978 Pilot Operating Handbook page 369

PILOT'S OPERATING HANDBOOK
SUPPLEMENT
CESSNA 400B IFCS
(TYPE IF-550A)
IN-FLIGHT WING LEVELING:
1. Airplane Elevator and Rudder Trim -- ADJUST.
2. TURN Knob -- CENTERED in detent.
3. AP/ON-OFF ROCKER SWITCH -- ON.
4. MODE SELECTOR AP Annunciator -- CHECK ON (green light
illuminated).
5. Lateral Trim Knob -- ADJUST to level wings.
6. PITCH Command Wheel -- ADJUST as desired.
ALTITUDE HOLD:
1.
MODE SELECTOR ALT Button -- PUSH.
2. MODE SELECTOR ALT Annunciator -- CHECK ON (green light
illuminated).
NOTE
The autopilot ON-OFF switch must be engaged for a short
time (maximum of 30 seconds) before the ALT switch can
be engaged.
COMMAND TURNS:
1.
TURN Knob -- ROTATE as desired.
,-, CLIMB OR DESCENT:
1. ALT Rocker Switch -- DISENGAGE.
2. Pitch Command Wheel -- ROTATE UP or DOWN as desired.
3. Rudder Trim -- ADJUST as required.
HEADING SELECT:
1. Heading Selector Knob on HSI --ROTATE bug to desired heading.
2. TURN Knob -- CENTERED in detent.
3. MODE SELECTOR HDG Button -- PUSH.
4. MODE SELECTOR HDG Annunciator -- CHECK ON (green light
illuminated).
NOTE
Airplane will turn automatically to selected heading.
VOR COUPLING:
1. TURN Knob -- CENTERED in detent (after turning airplane
heading within 135° of desired course).
11