Table of Contents
Advertisement
CESSNA 400 DME
(TYPE R-476A)
PILOT'S OPERATING HANDBOOK
SUPPLEMENT
SECTION 4
NORMAL PROCEDURES
DME OPERATION:
1.
TEST/ON-OFF Switch -- SET to
ON.
2.
DME Mode Selector Switch -- SET to NA V 1 or NAV
2.
3.
NA V 1 and NA V 2 VHF Navigation Receivers -- ON; SET FRE-
QUENCY selector switches to VOR/DME station frequencies, as
required.
NOTE
When the VOR frequency is
selected,
the appropriate DME
frequency is automatically channeled. Therefore, the sys-
tem does not provide independent operation of the DME for
reception of the DME Morse Code identifier.
4.
GS/TTS Switch -- SET as desired.
5.
TEST/ON-OFF Switch -- HOLD to TEST:
a.
Distance-to-Station Display readout is 188.8.
.
,
..,--,_.
b.
Knots/Minutes Display readout is 888.
6.
TEST/ON-OFF Switch -- RELEASE to ON;
display readouts
return to normal.
SECTION 5
PERFORMANCE
There is no change to the airplane performance when this avionic
equipment is installed. However the installation of an externally mounted
antenna or several related external antennas, will result in a minor
reduction in cruise performance.
4
Hide quick links:
Advertisement
Table of Contents
