Cessna TURBO CENTURION T210M 1978 Pilot Operating Handbook page 342

CESSNA 400 AUTOPILOT
(TYPE AF-420A)
PILOT'S OPERATING HANDBOOK
SUPPLEMENT
IN-FLIGHT WINGS LEVELING:
1.
Airplane Elevator and Rudder Trim -- ADJUST.
2. Avionics Power Switch -- ON.
3. PULL-TURN Knob -- PULL out and center in detent.
4. PITCH Control -- ADJUST to centered position.
5. PITCH TRIM Lever -- ADJUST to centered position.
6. ON-OFF Switch -- ON.
7. Lateral Trim Lever -- ADJUST to level wings.
8. PITCH TRIM Lever -- ADJUST for longitudinal trim.
ALTITUDE HOLD:
1.
PITCH Control -- DETENT position.
2. OFF-ALT ON Switch -- ALT ON.
COMMAND TURNS:
1.
PULL-TURN Knob -- PULL and ROTATE.
CLIMB OR DESCENT:
1.
Aircraft Power and Trim -- ADJUST.
2. PITCH Control Wheel -- Rotate UP or DOWN.
3. Lateral Trim Lever -- ADJUST to level wings.
4. PITCH Trim Lever -- ADJUST
if
aircraft trim light is illuminated.
NOTE
If
trim light remains illuminated readjust the aircraft
elevator trim wheel.
HEADING SELECT:
1.
PUSH Knob on DG -- SET to aircraft magnetic heading.
2. HDG Knob on DG -- ROTATE "bug" to desired heading.
3. Function Switch -- SET to HDG.
4. PULL-TURN Knob -- PUSH.
NOTE
Airplane will turn automatically to selected heading.
OMNI COUPLING:
6
1.
PULL-TURN Knob -- PULL out.
2. A/P NAV 1/NAV 2 Selector Switch (On Instrument Panel) --
SELECT desired Nav receiver.