Table of Contents
Advertisement
CESSNA 400 ADF
(TYPE R-446A)
PILOT'S OPERATING HANDBOOK
SUPPLEMENT
SECTION 2
LIMITATIONS
There is no change to the airplane limitations when this avionic
equipment is installed.
SECTION 3
EMERGENCY PROCEDURES
There is no change to the airplane emergency procedures when this
avionic equipment is installed.
SECTION 4
NORMAL PROCEDURES
TO OPERATE AS A COMMUNICATIONS RECEIVER ONLY:
4
1.
OFF/VOL Control -- ON.
2.
REC Pushbutton -- PUSH in.
NOTE
ADF indicator pointer will stow at a 90-degree position to
alert the pilot to non-ADF operation.
3.
PRI Frequency Selectors -- SELECT desired operating frequency.
4.
SEC Frequency Selectors -- SELECT desired operating frequency.
5.
1-2 Selector Switch -- 1 position.
NOTE
1-2 selector switch can be placed in
the
2 position for
operation on secondary frequency. The re-select lamp will
flash only when frequency selection is outside of operat-
ing range of the receiver.
6.
ADF SPEAKER/PHONE Switch -- SELECT speaker or phone
position.
7.
VOL Control -- ADJUST to desired listening level.
Hide quick links:
Advertisement
Table of Contents
