Table of Contents
Advertisement
WINDSHIELD
ANTI-ICE SYSTEM
(MODEL T210)
PILOT'S OPERATING HANDBOOK
SUPPLEMENT
SECTION 4
NORMAL PROCEDURES
The anti-ice system should be checked, prior to engine start, as follows:
1.
Anti-Ice Panel -- INSTALL.
2.
Master Switch -- ON.
3.
Windshield Anti-Ice Switch -- ON for one minute.
4.
Anti-Ice Panel-- CHECK FOR WARMTH (step outside the airplane
to feel for warmth in the panel).
5.
Windshield Anti-Ice and Master Switches -- OFF.
CAUTION
Inadvertent prolonged operation of the heated anti-icing
panel without the engine running may cause damage to the
panel and crazing of the windshield.
Flight into known or forecast icing conditions is prohibited. If unex-
pected icing conditions are encountered, the following procedure is recom-
- ,
mended:
1.
Windshield Anti-Ice Switch -- ON 5 to 10 minutes in advance of its
need. The anti-ice system may become ineffective if a large
accumulation of ice is allowed to form.
2.
Windshield Anti-Ice Switch -- OFF when the possibility of icing no
longer exists.
SECTION 5
PERFORMANCE
There is no change to the airplane performance when the windshield
anti-ice system is installed.
2
Hide quick links:
Advertisement
Table of Contents
