Selection Of External Device - Omron CJ Series Manual

2

Selection of External Device

Select the External Device to be connected to the Display.
Setup Items
Maker
Driver
Use System Area
Port
GP-Pro EX Device/PLC Connection Manual
Select the maker of the External Device to be connected. Select "OMRON Corporation".
Select a model (series) of the External Device to be connected and connection method.
Select "CS/CJ Series HOST Link".
Check the External Device which can be connected in "CS/CJ Series HOST Link" in
system configuration.
"1 System Configuration" (page 3)
Check this option when you synchronize the system data area of Display and the device
(memory) of External Device. When synchronized, you can use the ladder program of
External Device to switch the display or display the window on the display.
Cf. GP-Pro EX Reference Manual "Appendix 1.4 LS Area (only for direct
access method)"
This can be also set with GP-Pro EX or in off-line mode of Display.
Cf. GP-Pro EX Reference Manual " 6.13.6 Setting Guide of [System Setting
Window] [Main Unit Settings] Settings Guide System Area Setting"
Cf. GP3000 Series User Manual "4.3.6 System Area Setting"
Select the Display port to be connected to the External Device.
Setup Description
5
CS/CJ Series HOST Link Driver