Grid Voltage; Grounding - Ingeteam Ingecon Sun Lite Series Installation Manual

La copia, circulación o uso de este documento o de su contenido requiere un permiso por escrito. Su in-

9.5.2 Grid voltage

cumplimiento será denunciado por daños y perjuicios. Todos los derechos están reservados, incluyendo
This menu serves to modify the configuration of the voltage output to the terminal strips.
aquellos que resulten de derechos de patentes o registro del diseño.
STOP
La correspondencia del contenido del documento con el hardware ha sido comprobada. Sin embargo,
It is not used for any of the models to which this manual refers.
pueden existir discrepancias. No se asume ninguna responsabilidad por la concordancia total. La infor-
mación que contiene este documento es revisada regularmente y es posible que se produzcan cambios
en siguientes ediciones.
El presente documento es susceptible de ser cambiado.
9.5.3 Grounding (only units with a transformer)
This menu is used to configure the status of the positive and negative poles with respect to ground. It allows three
options, which are:
- positive pole grounded, negative pole insulated
- negative pole grounded, positive pole insulated
- positive and negative poles insulated
The copy, distribution or use of this document or of its content requires written authorisation. Any
breach thereof will be reported for damages. All rights reserved including those of patent rights or
on the GROUNDING option from the CONFIGURATION submenu.
Press
OK
design registration.
The conformity of the document content with the hardware described has been checked. However,
The following screen will appear showing the three
available options. Select the desired option using the
discrepancies may exist. Liability will not be assumed for total concordance. The information contained
and keys, then press
in this document is regularly revised and it is possible that there may be changes in subsequent
editions.Other functions may be available which are not covered by this document.
This document may be changed.
The next screen will request the password to make the
change. Enter it and press
The configuration in process screen will appear for
a few seconds and then the configuration completed
screen.
Finally, the following screen will be shown advising of
the need to check that the necessary measures on the
wiring have been taken for the new configuration.
Page 2 Page 50 50
.
OK
.
OK
12:00

GROUNDING

> Ungrounded
PV+ Ground
PV- Ground
12:00
GROUNDING
Password
0
* * *
12:00
GROUNDING
Ensure that you make all the nec-
essary wiring connections
Manual de instalación Installation Manual
INGECON® SUN LITE INGECON® SUN LITE
AAY2000IKH01 AAY2000IKI01
12/04/10
12/04/10
12/04/10
AAY2000IKH01 AAY2000IKI01
Rev. _B Rev. _B
Fecha: Marzo 2011 Date: March 2011