Electrical Disconnection - Ingeteam Ingecon Sun Lite Series Installation Manual

Installation Manual Manual de instalación
INGECON® SUN LITE INGECON® SUN LITE
AAY2000IKH01 AAY2000IKI01

5.4 Electrical disconnection

To disconnect the unit, follow the steps presented in Section 3 of this manual in reverse.
Take careful note of the following warning:
There are electrical capacitances in the unit which can maintain high voltages even after
having disconnected the inverter from the solar panels and the grid.
CATÁLOGOS
And remember:
Ingecon
Ingecon® Sun units may only be opened by authorised personnel.
PC00ISA01_A
During installation and maintenance operations on the units, the use of personal protective equipment, hard hat,
gloves and safety footwear is mandatory.
Do not touch the side or rear of the inverter, these can reach high temperatures.
MANUALES
Installation work requiring opening the unit should be done in a dry environment, so that no moisture left inside could
Manual de Usuario Ingecon
condense and damage the electronics.
Ingeteam Energy, S.A. is not liable for any damages caused by improper use of their equipment.
AAY2000IKE01
Manual de Instalación Ingecon
AAY2000IKH01
Manual de Instalación de los Accesorios de Comunicación
AAX2002IKH01
AAY2000IKI01 AAY2000IKH01
Rev. _B Rev. _B
Date: March 2011 Fecha: Marzo 2011
DOCUMENTACIÓN RELACIONADA
®
Sun Catálogo Comercial
®
Sun LITE
®
Sun LITE
Page 37 Page 3 37