Ingeteam Ingecon Sun Lite Series Installation Manual page 35

Manual de instalación Installation Manual
INGECON® SUN LITE INGECON® SUN LITE
AAY2000IKH01 AAY2000IKI01
The following figure shows how the quick connector must be wired.
Ingecon Sun 2.5TL, 3.3TL, 4,6TL, 5TL, 5
Ingecon Sun 2.5, 3.3
CATÁLOGOS
Ingecon Sun 2.5TL, 3TL, 3.3TL, 3.68TL,
4.6TL, 5TL, 6TL.
Ingecon
PC00ISA01_A
MANUALES
Manual de Usuario Ingecon
5.3.7.1 Protection of the connection to the Electricity Grid
It is necessary to install protection elements in the connection between the inverter and the Electricity Grid.
AAY2000IKE01
Thermomagnetic circuit breaker
A thermomagnetic circuit breaker and/or fuse needs to be installed in the connection from the inverter to the Elec-
tricity Grid.
Manual de Instalación Ingecon
The following table provides the necessary data for the selection of these devices by the installer. All data in Am-
peres.
Ingecon Sun Maximum inverter
AAY2000IKH01
current
2.5 TL 13
3 TL 17
Manual de Instalación de los Accesorios de Comunicación
3.3 TL 17
3.68 TL 17
AAX2002IKH01
3.8 TL 18.8
4.6 TL 24.4
5 TL 25.5
6 TL 26.2
When selecting the protection in an installation, it must be borne in mind that its circuit breaking capacity needs to
be higher than the grid connection point's short-circuit current.
It must be taken into account for correct selection of the protection that the ambient working temperature influences
the maximum current permitted by these protections as indicated by the manufacturer.
AAY2000IKI01 AAY2000IKH01
Rev. _B Rev. _B
Fecha: Marzo 2011 Date: March 2011
agujeros de la base de la carcasa
Ingecon Sun 2.5, 3.3
DOCUMENTACIÓN RELACIONADA
agujeros de la base de la carcasa
®
Sun Catálogo Comercial
Desde la Red Eléctrica
®
Sun LITE
Rated current for
the gL-type fuse
20
25
25
25
25
32
32
32
Neutro
Tierra
Borna
®
Sun LITE
Rated current for
the type B MCB
20
25
25
25
25
32
32
32
desde la red
eléctrica
Fase
max. 6 mm
Señal
L
Fase (R,S ó T) de la red
N
Neutro de la red
Tierra
2
Page 35 Page 3 35