This Document May Be Changed; Anchoring Surface - Ingeteam Ingecon Sun Lite Series Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

La copia, circulación o uso de este documento o de su contenido requiere un permiso por escrito. Su in-

INGECON SUN 3 8 TL, INGECON SUN 4.6 TL,

cumplimiento será denunciado por daños y perjuicios. Todos los derechos están reservados, incluyendo

INGECON SUN 5 TL, INGECON SUN 5 and

aquellos que resulten de derechos de patentes o registro del diseño.

INGECON SUN 6 TL units are cooled correctly with

support from two fans:

La correspondencia del contenido del documento con el hardware ha sido comprobada. Sin embargo,

pueden existir discrepancias. No se asume ninguna responsabilidad por la concordancia total. La infor-

mación que contiene este documento es revisada regularmente y es posible que se produzcan cambios

en siguientes ediciones.

El presente documento es susceptible de ser cambiado.

In all cases ensure that the inlet and outlet air can circulate freely through the grilles or windows in the

base, top and sides.

2.1.8 Anchoring surface

To guarantee good heat evacuation and promote sealing, the units must be placed on a perfectly vertical wall or,

failing this, with a slight slope of a maximum of +80º o -80º.

The copy, distribution or use of this document or of its content requires written authorisation. Any

design registration.

The conformity of the document content with the hardware described has been checked. However,

discrepancies may exist. Liability will not be assumed for total concordance. The information contained

in this document is regularly revised and it is possible that there may be changes in subsequent

editions.Other functions may be available which are not covered by this document.