Start / Stop; Partial Data Reset; Change Inverter Number - Ingeteam Ingecon Sun Lite Series Installation Manual

Manual de instalación Installation Manual
INGECON® SUN LITE INGECON® SUN LITE
AAY2000IKH01 AAY2000IKI01
9.8

Start / Stop

The operation of the inverter can be stopped and started manually using this menu.
The Start or Stop status remains unchanged even if the unit losses its power supply.
OK
Press to toggle from one status to the other. The display shows the following message:
Select the desired option and press
12:00
CATÁLOGOS
MAIN MENU
Change date
Ingecon
Start / Stop
Reset partial data

Change inverter number

PC00ISA01_A
9.9

Partial Data Reset

The partial counters Part E, Tpar con and Npcon are set to zero from this menu.
OK
Press to set the counters to zero. The following message is shown on the screen:
OK
Pressing again confirms the selection.
MANUALES
Manual de Usuario Ingecon
12:00
MAIN MENU
AAY2000IKE01
Change date
Start / Stop
Reset partial data Reset partial data
Change inverter number
Manual de Instalación Ingecon
AAY2000IKH01
9.10 Change inverter number
Manual de Instalación de los Accesorios de Comunicación
From this menu you can assign the inverter a number. This is required for configuring communications.
With keys and you can change the inverter number.
AAX2002IKH01
OK
Press to confirm the number selected.
12:00
MAIN MENU
Change date
Start / Stop
Reset partial data
Change inverter number
AAY2000IKI01 AAY2000IKH01
Rev. _B Rev. _B
Date: March 2011 Fecha: Marzo 2011
DOCUMENTACIÓN RELACIONADA
OK
again. The stopped status is maintained until the menu is accessed again.
12/04/10
®
Sun Catálogo Comercial
®
Sun LITE
12/04/10
12/04/10
12:00
ON / OFF
Change to Stop (OK)
Cancel (ESC)
12:00
RESET PARTIAL DATA
Confirm (OK)
Cancel (ESC)
®
Sun LITE
12:00
CHANGE INV NUMBER
Inverter number 101
Confirm (OK)
Cancel (ESC)
09/01/09
09/01/09
09/01/09
Page 53 Page 3 53