Ingeteam Ingecon Sun Lite Series Installation Manual page 29

Installation Manual Manual de instalación
INGECON® SUN LITE INGECON® SUN LITE
AAY2000IKH01 AAY2000IKI01
Equipment edge
150 - 165
75
75
75
100 100
240 - 250
CATÁLOGOS
Ingecon
PC00ISA01_A
MANUALES
Manual de Usuario Ingecon
AAY2000IKE01
Manual de Instalación Ingecon
AAY2000IKH01
Manual de Instalación de los Accesorios de Comunicación
AAX2002IKH01
AAY2000IKH01 AAY2000IKI01
Rev. _B Rev. _B
Fecha: Marzo 2011 Date: March 2011
Suspend the inverter on the transformer by fitting the holes in the former onto
DOCUMENTACIÓN RELACIONADA
the lugs at the top of the transformer.
Adjust the two housings so that their edges coincide and are parallel, so that the
drilled plates at the rear bottom right of the inverter and the front bottom right
part of the transformer are in contact and their drilled parts coincide.
To join the inverter and transformer together, the choice can be made between
a nut and bolt or the use of a padlock.
Check that the transformer is secured well.
The following drawings show the steps to take:
®
Sun Catálogo Comercial
®
Sun LITE
®
Sun LITE
200 mm
200 mm
To be fixed to the wall
according to the instruc-
tions shown
Page 29 Page 3 29