System Description; Design Registration; Location; Environment - Ingeteam Ingecon Sun Lite Series Installation Manual

Table of Contents

Advertisement

La copia, circulación o uso de este documento o de su contenido requiere un permiso por escrito. Su in-
2

System description

cumplimiento será denunciado por daños y perjuicios. Todos los derechos están reservados, incluyendo
aquellos que resulten de derechos de patentes o registro del diseño.
La correspondencia del contenido del documento con el hardware ha sido comprobada. Sin embargo,

2.1 Location

pueden existir discrepancias. No se asume ninguna responsabilidad por la concordancia total. La infor-
mación que contiene este documento es revisada regularmente y es posible que se produzcan cambios
INGECON-SUN LITE units can be located in practically any environment favourable for PV farms.
en siguientes ediciones.
Guidelines are provided in this section for choosing a suitable environment and adapting the unit to it properly.
El presente documento es susceptible de ser cambiado.

2.1.1 Environment

Place the units in a place which is accessible for installation and maintenance work
and which permits use of the keyboard and the reading of the front indicator LEDs.
The copy, distribution or use of this document or of its content requires written authorisation. Any
Do not place any object on top of the unit.
breach thereof will be reported for damages. All rights reserved including those of patent rights or

design registration.

Caution:
The radiator can reach 85ºC. Do not place any material sensitive to the high
The conformity of the document content with the hardware described has been checked. However,
surrounding air temperatures close to the inverter.
discrepancies may exist. Liability will not be assumed for total concordance. The information contained
in this document is regularly revised and it is possible that there may be changes in subsequent
editions.Other functions may be available which are not covered by this document.
Avoid corrosive environments.
This document may be changed.

2.1.2 IP rating

INGECON-SUN LITE units have an IP level of protection against external agents which enables them to be
installed outdoors.
IP65 means that the unit is fully protected against the ingress of dust and also
against water jets from any direction as defined for this level of protection in standard
IEC60529.
However, excessive moisture can cause a safety shutdown of the unit to protect it. Hence the following is
recommended:
Locate the units in a place protected from the rain.

2.1.3 Ambient temperature

INGECON-SUN LITE units are designed to operate at between –20ºC and
To operate in HT mode, maximum ambient temperature must not exceed 45ºC.
To operate in HP mode, maximum ambient temperature must not exceed 40ºC.
Page 12
Page 2
12
Manual de instalación
Installation Manual
INGECON® SUN LITE
INGECON® SUN LITE
AAY2000IKH01
AAY2000IKI01
+70ºC.
AAY2000IKH01
AAY2000IKI01
Fecha: Marzo 2011
Date: March 2011
Rev. _B
Rev. _B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents