Figure 18: Gsd Configuration (Example) - WAGO I/O-SYSTEM 750 Manual
2ai 4-20ma hart ex i 2-channel analog input; hart; intrinsically safe, 2ai 4-20ma hart ne43 ex i 2-channel analog input; hart; namur ne43; intrinsically safe
Hide thumbs
Also See for I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
58
Operating Modes
The size of the process images is then determined by the compiled configuration
data.
Additional Information on Installing the GSD Files
Please refer to the documentation for the configuration software which you are
using for information on installing the GSD files.
The required operating mode for the HART I/O module can be selected and
specified right at the configuration stage.
Further data for the HART I/O module can then be specified in a
parameterization dialog box corresponding to the selected module.
Figure 18: GSD Configuration (Example)
1.
Double-clicking the I/O module to be parameterized opens the
parameterization dialog.
The parameterization dialog displays a list of module-specific parameters that are
listed in the table below.
2.
You can double-click the individual parameter values to edit or select them
from a list.
Manual
Version 1.4.0
WAGO-I/O-SYSTEM 750
750-484 2AI 4-20mA HART Ex i
Advertisement
Chapters
Table of Contents
