28
Device Description
3.8
Standards and Guidelines
The I/O modules meet the following standards and guidelines:
EU Directive
Explosive atmosphere
Devices – General requirements
Explosive atmosphere
Equipment protection by increased safety "e"
Explosive atmosphere
Equipment protection by intrinsic safety "I"
Explosive atmospheres
General requirements
Explosive atmosphere
Equipment protection by increased safety "e"
Explosive atmospheres
Equipment protection by intrinsic safety "i"
Explosive atmospheres
General requirements
Explosive atmospheres
Equipment protection by intrinsic safety "i"
Explosive atmospheres
Equipment protection by type of protection "n"
Explosive atmospheres
Equipment - General requirements
Explosive atmospheres
Equipment Protection by Intrinsic Safety "i"
Explosive atmospheres
Equipment Protection by Intrinsic Safety "n"
UL Standard for Safety –
for Industrial Control Equipment
American National Standard –
for Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and
Class III. Division 1 and 2 Hazardous (Classified) Location
Manual
Version 1.4.0
WAGO-I/O-SYSTEM 750
750-484 2AI 4-20mA HART Ex i
2014/34/EU
EN 60079-0
IEC 60079-7
EN 60079-11
IEC 60079-0
IEC 60079-7
IEC 60079-11
UL 60079-0
UL 60079-11
UL 60079-15
CAN/CSA-C22.2 No. 60079-0
CAN/CSA-C22.2 No. 60079-11
CAN/CSA-C22.2 No. 60079-15
UL 508
ANSI/ISA 12.12.01