Configuration Example With Cmd - WAGO 752 Owner's Manual

32 • INTERBUS

7.7 Configuration Example With CMD

The following example shows how to configure an I/O module using CMD.
Reference the CMD manual for further description of this software.
1. Start CMD
Fig. 7-10: CMD icon
2. Create a new project
Create a new project for your application.
Menu path: File - New
Fig. 7-11: CMD main window
3. Select fieldbus controller board
Right-click on the controller board icon, select the menu item "Type...", and
select the current controller board type.
Fig. 7-12: Select controller board
Fieldbus Dependent I/O Module
INTERBUS
p932x08x
p932x09e
p932x10e