NEC Express5800/320Lb User Manual page 231

Procedure in NEC ESMPRO Manager
Save the image data of the update firmware in an arbitrary directory of the NEC
1.
Express5800/ft series.
Save the image data in any way. Write down the path to the directory in which the image
data is saved.
Select the target component in the [FTServer] tree.
2.
Check the current state with the "State" display on the target component screen. If the
3.
component is operating, stop the component.
Click the [Firmware Update] button in the [Update] screen for the target component.
4.
Sample screen of NEC ESMPRO Manager
Select [Specify the file path to update], enter the
5.
directory in which the updated firmware
specified in the input box in step 1 is saved, and
click the [Execute] button.
Perform the firmware update.
The update result can be confirmed by the state
on the target component screen (indication of
"Firmware update completed"). The result of the
update processing is reported by the NEC
Express5800/ft series as an alert.
After the BIOS for a single CPU module is completed, click the [Jump Switch] button.
6.
The module completely updated is started and the active module is stopped.
[Update] screen of CPU module
[CPU Module] – [Update]
Installing and Using Utilities 5-69