NEC Express5800/320Lb User Manual page 147

Start Procedure
Start Fast!UTIL in the procedure below:
Turn on the power of the server.
1.
The start message appears on a screen in the middle of POST.
Press Q and Ctrl together.
2.
Fast!UTIL is started.
IMPORTANT: Press these keys before message "QLogic Adapter using
IRQ number x" or later appears.
QLogic Corporation
QLA 1216x PCI SCSI ROM BIOS Version X.XX
Copyright (C) QLogic Corporation 1993-2001 All rights reserved.
www.qlogic.com
Press <CTRL-Q> for Fast!UTIL
ISP12160 Firmware Version xx.xx.xx
QLogic Adapter using IRQ number X
Device
Number
81
Highlight "Select Host Adapter" using the cursor keys and press Enter.
3.
Device Adapter SCSI
Type Number
Disk 0
Fast!UTIL Options
Configuration Settings
Scan SCSI Bus
SCSI Disk Utility
Select Host Adapter
Exit Fast!UTIL
SCSI Vendor
ID LUN ID
0 0 SEAGATE ST32550
System Configuration 4-29
Product Product
ID Revision
7394