NEC Express5800/320Lb User Manual page 211

Hide thumbs Also See for Express5800/320Lb:

Table of Contents

Confirmation of mirror status

To check the redundancy status of the failed mirror disk, open [Mirror Disk] screen under

[FTServer]. On this screen, you can check the redundancy status of the mirror and the

status of the mirrored hard disks.

IMPORTANT: The mirroring redundancy status will change depending the status of the

two hard disks that make up a mirror as follows:

Status of hard disk 1

"-" : No status is shown.

TIPS: Unless the hard disks make up a mirror, the Mirror Disk screen

does not show any information.

Installing and Using Utilities 5-49

[Mirror Disk]

Status of hard disk 2

Status of mirror volume

Express5800/320lb-r N8800-027f N8800-028f