NEC Express5800/320Lb User Manual page 333

If you have a computer that runs Windows 2000/NT or Windows 95/98/Me.
You can also create a "Windows 2000 OEM-DISK for EXPRESSBUILDER" by the steps
below:
1.
Prepare a 3.5-inch floppy disk.
2.
Insert the EXPRESSBUILDER CD-ROM into the drive of a computer that runs Windows
2000/NT or Windows 95/98/Me.
3.
From [Software Setup], select [Create OEM disk].
4.
Follow the instructions on the screen to insert the floppy disk.
Windows 2000 OEM-DISK for EXPRESSBUILDER will be created on the floppy disk.
Write-protect and place a label on the disk and keep it in a safe place.
If you have an update CD-ROM "NEC Express5800/ft Series ft Control Software
(Ver:n.n)."
Follow the steps below to create a "Windows 2000 OEM-DISK for
EXPRESSBUILDER":
1.
Prepare a 3.5-inch floppy disk.
2.
Insert the update CD-ROM into the drive of a computer that runs Windows 2000/NT or
Windows 95/98/Me.
3.
From the Start menu, select [Specify Filename and Run] to run
\WINNT\BINMAKEFD\W2K\MAKEOEM.BAT on the CD-ROM.
4.
Follow the instructions on the screen to insert the floppy disk.
Windows 2000 OEM-DISK for EXPRESSBUILDER will be created on the floppy disk.
Write-protect and place a label on the disk and keep it in a safe place.
Troubleshooting 7-39