NEC Express5800/320Lb User Manual page 354

8-18 System Upgrade
The inserted disks will appear on [VERITAS Enterprise Administrator].
13.
If the status of a disk is "No signature," right-click that disk to place signature.
Select and right-click a disk and select [Add to dynamic disk group].
14.
IMPORTANT:
If [Unknown disk group] appears:
Perform [Disk outer join]. Then, erase [Unknown disk] as described in Steps
7 to 11 above. Erase the volumes and perform [Erase disk from dynamic disk
group]. Follow the wizard to perform [Add disk to dynamic disk group].
If [Different format] appears:
Perform [Erase disk from dynamic disk group]. Then, follow the wizard to
perform [Add disk to dynamic disk group].
If you add a used disk, do the following steps: