NEC Express5800/320Lb User Manual page 161

TIPS:
Place the clip on the jumper pins 11 and 12 after use to keep the pin.
If you place it on other pins, the server may malfunction.
Remove the PCI Module #1 from the server (see Chapter 8).
10.
Mount PCI Module #2 (on which Password has not been cleared) to the server.
11.
Shortly after you connect the power cord, the BMC status LED on PCI Module #2 will
12.
start to blink.
When Password clear is completed, the BMC status LED will go off.
13.
NOTE:
The BMC status LED blinks to show that synchronous processing is
being performed between the two modules. When this process is
complete, Password has also been cleared on PCI Module #2
TIPS:
For the location of the BMC status LED, see "Names and Functions
of Components" in Chapter 2.
For description of the BMC status LED, see "LED" in Chapter 2.
System Configuration 4-43