NEC Express5800/320Lb User Manual page 216

5-54 Installing and Using Utilities
(3) Connect a new hard disk
Next, connect a new hard disk to the same SCSI Slot. At this time, NEC ESMPRO
Agent reports the following alert to manager. And icons related to the hard disk are
changed to the state of normal in the data viewer.
When the hard disk is connected, SCSI Slot changes the status to "Normal".
TIPS: You can identify the new hard disk by DevicePathID (ex.
10/40/1).
When the hard disk is connected, SCSI Slot changes the status to "Normal".
[Alert report]
[SCSI Slot] → [General]