NEC Express5800/320Lb User Manual page 253

Right-clicking the server
9.
name to open the pop-up
menu and select [Open
Remote Console] to open
[MWA Remote Console].
Select the [Action at Remote
10.
Console Connect] command
from the popup menu displayed by right-clicking the server window to display the [Action
at Remote Console Connect] dialog box. Then select [Go MWA mode].
Insert NEC EXPRESSBUILDER CD-ROM into the drive of the computer to be managed
11.
and insert floppy disk storing the configuration information (CSL_LESS.CFG) into the
FDD drive.
Hook up the management PC to LAN.
12.
Power off and on the main unit to reboot the system.
13.
After one reboot, the main menu will appear on the management PC's screen, on which
you can perform hardware setup and run utilities.
TIPS: If the configuration information (CSL_LESS.CFG) in the FD
has already been loaded, the main menu will appear without a reboot.
When the main menu appears on the management PC's screen, eject the floppy disk.
14.
If you use other tools, exit NEC EXPRESSBUILDER and power on/off the main unit.
15.
IMPORTANT: After completing the procedure for remote console
connection, uncheck [Reset] of [Activate] in [Property] dialog box.
Installing and Using Utilities 5-91