NEC Express5800/320Lb User Manual page 405

N8803-030F Fibre Channel Controller
N8803-031F Fibre Channel Controller
Slots to install the board
N code
N8803-030F Fibre Channel
N8803-031F Fibre Channel
√: Can be installed.
Installation of driver
When you start the system with the N8803-030F/031F Fibre Channel Controller installed,
the driver automatically becomes available by the plug-and-play feature
If the [Digital Signature Not Found] dialog box appears, click [Yes].
IMPORTANT:
of OS is completed. Use Fibre Channel Controllers in pairs. Insert a
Fibre Channel Controller into a slot in a PCI module and another Fibre
Channel Controller into the slot at the same location in another PCI
module.
PCI Board Status LED Indications
LED
Description
indications
Off PCI board is mounted
correctly and operates
in duplex mode.
The PCI board is not
mounted; is mounted
incorrectly; or power
is not supplied.
Amber Performing POST; or
the PCI board is
mounted correctly and
operates in simplex
mode.
Red Although the PCI
board is mounted, it
may be offline or not
be working.
Name
#1
–
Controller
–
Controller
–: Cannot be installed.
Insert Fibre Channel Controllers after the installation
PCI slot
Group 1 Group 2
#2 #3 #1 #2
√ √ √
–
√ √ √
–
Action
The system operates normally.
If the PCI board is not mounted or is mounted
incorrectly, just mount it correctly; there is no problem.
Check the condition of power unit.
When not solved, contact your sales agent.
To use ft series features, attach a PCI board to a slot
of the same on the other PCI module.
Remount the PCI board correctly.
Remount the PCI module correctly.
When not solved, contact your sales agent.
System Upgrade 8-69
Remarks
#3
√
Each PCI module can
contain one board only.
√
Only one of them can be
mounted. (cannot be
mounted together)