Auto Refresh Setting - Mitsubishi Electric MELSEC Q Series User Manual

5 UTILITY PACKAGE (GX Configurator-TC)

5.5 Auto Refresh Setting

5 - 17
Downloaded from ManualsNet.com
[Purpose]
Configure the Q64TC buffer memory for auto refresh, for each channel.
Refer to Section 5.1 for the auto refresh setting types.
This auto refresh setting eliminates the need for reading and writing by sequence
programs.
[Operating procedure]
"Start I/O No.
1: Enter the start I/O No. in hexadecimal.
[Setting screen]
search engine
1 " "Module type" "Module model name"
MELSEC-Q
Auto refresh
5 - 17