IMO iDrive2 XKL Instruction Manual page 48

iDrive2 inverters
Function
Name
code
terminals
state at
previous 2
fault
Output
terminals
P07.56 state at
previous 2
fault
P08.00 ACC time 2
P08.01 DEC time 2
Jogging
P08.06 running
frequency
Jogging
P08.07 running ACC
time
Jogging
P08.08 running DEC
time
Traverse
P08.15
range
Sudden
jumping
P08.16
frequency
range
Traverse
P08.17
boost time
Traverse
P08.18 declining
time
Detailed instruction of parameters
P08 Group Enhanced function
Refer to P00.11 and P00.12 for detailed definition.
IMO XKL series selects four groups of ACC/DEC time
which can be selected by P5 group. The first group of
ACC/DEC time is the factory default.
Setting range:0.0~3600.0s
This parameter is used to define the reference frequency
during jogging.
Setting range: 0.00Hz ~P00.03(the Max. frequency)
The jogging ACC time is the time to accelerate from 0Hz
to the Max. Frequency.
The jogging DEC time is the time to decelerate from the
Max. Frequency (P0.03) to 0Hz.
Setting range:0.0~3600.0s
This function applies to the applications where traverse
and convolution function are required such as textile and
chemical fibre.
The traverse function means that the output frequency of
the inverter is fluctuated with the set frequency as its
center. The route of the running frequency is illustrated
as below, of which the traverse is set by P08.15 and
when P08.15 is set as 0, the traverse is 0 with no
function.
48
Function Parameters
Default
Modify
value
0
●
Depend
○
on model
Depend
○
on model
5.00Hz ○
Depend
○
on model
Depend
○
on model
0.0%
○
0.0%
○
5.0s
○
5.0s ○