Fx 2N -8Eyt-H (Transistor Output); Product Specifications - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
16.12 FX -8EYT-H (Transistor Output)
2N

16.12.1 Product specifications

The generic specifications are identical to the main unit specifications.
For external wiring, refer to the following chapters.
1. Power supply specifications
Item
Product type
Rated voltage
2. Weight and Other specifications (External dimensions are described later.)
Item
MASS (Weight)
Other
3. Output specifications (Transistor output type)
Item
Output Points
Connection type
Output unit/type
External power supply
Output circuit insulation
Indication of output operation
Resistance load
Max. load
Inductive load
Open circuit leakage current
Min. load
OFF ON
Response time
ON OFF
Output circuit configuration
→ Refer to Section 4.1 for generic specifications.
24V DC (supplied from main unit and input/output powered extension unit)
• The extension cable is already connected to the extension block.
• Accessories: Label for indication of input/output number
• The DIN46277 rail (width: 35 mm (1.38")) or direct installation.
Vertical terminal block (M3 screws)
Activation of the photo-coupler will light the LED indicator lamp on panel.
The total load current per common should be as follows:
• 4 output points/common: 2A or less
The total of inductive loads per common terminal should be the following value.
• 4 output point/common terminal: 48W or less/24V DC
Fuse
DC power
supply unit
Fuse
DC power
supply unit
16 Input/Output Extension Blocks
16.12 FX2N-8EYT-H (Transistor Output)
→ Refer to Chapter 12 for output wiring.
FX -8EYT-H
2N
FX 2N extension block
FX -8EYT-H
2N
Approx. 0.2kg (0.44lbs)
FX 2N -8EYT-H
8 points
Transistor/sink output
5-30 V DC
Photo-coupler insulation
1A/point
24W/24V DC
0.1mA/30V DC
-
0.2ms or less/1A
0.4ms or less/1A
Load
Y
COM1
Y
COM2
11
12
13
14
15
16
17
18
19
20
283