FX
Series Programmable Controllers
3G
User's Manual - Hardware Edition
19.16.7 Pointers for using the display screen protect function
The display screen protect function settings should be specified in a sequence program.
• The protect function is enabled by using the display module's "monitor/test function" to change the system
information's (system signal 1) "D
• Once the setting is made, it cannot be canceled from the display module.
• To cancel the setting, use the programming tool to change the system information's (system signal 1)
"D
+3" current value to a value other than "1" and "2".
If the system information's (system signal 1) "D
the display screen protect function can be canceled by turning the power off, then on again.
350
+3" current value to "1" or "2".
+3" is set in a general purpose data register, however,
19 Display Module (FX3G-5DM)
19.16 Display Screen Protect Function