Fx 2N -16Eys (Triac Output: 16 Points); Product Specifications - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
16.13 FX -16EYS (Triac Output: 16 Points)
2N

16.13.1 Product specifications

The generic specifications are identical to the main unit specifications.
For external wiring, refer to the following chapters.
1. Power supply specifications
Item
Product type
Rated voltage
2. Weight and Other specifications (External dimensions are described later.)
Item
MASS (Weight)
Other
3. Output specifications (Triac output type)
Item
Output Points
Connection type
Output type
External power supply
Output circuit insulation
Indication of output operation
Resistance load
Max. load
Inductive load
Open circuit leakage current
Min. load
OFF ON
Response time
ON OFF
Output circuit configuration
→ Refer to Section 4.1 for generic specifications.
24V DC (supplied from main unit and input/output powered extension unit)
• The extension cable is already connected to the extension block.
• Accessories: Label for indication of input/output number
• The DIN46277 rail (width: 35 mm (1.38")) or direct installation.
Vertical terminal block (M3 screws)
Activation of the photo-thyristor will light the LED indicator lamp on panel.
The total load current per common should be as follows:
• 8 output points/common: 0.8A or less
15VA/100V AC, 30VA/200V AC
1mA/100V AC, 2mA/200V AC
0.4VA/100V AC, 1.6VA/200V AC
Load
Fuse
AC power
supply
A common number applies to the
16 Input/Output Extension Blocks
16.13 FX2N-16EYS (Triac Output: 16 Points)
→ Refer to Chapter 12 for output wiring.
FX -16EYS
2N
FX 2N extension block
FX -16EYS
2N
Approx. 0.3kg (0.66lbs)
FX 2N -16EYS
16 points
Triac output (SSR)
85 to 242V AC
Photo-coupler insulation
0.3A/point
1ms or less
10ms or less
Y
U
COM
of [COM ].
11
12
13
14
15
16
17
18
19
20
285