Protect Switch; Protect Switch Setting; Protect Switch Operation; Precautions When Setting And Using The Switch - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
21.6

PROTECT Switch

21.6.1 PROTECT switch setting

Reading from and writing to memory cassette operations can be performed
by using the programming tool.
Because sequence programs are written by an electronic format, a special
ROM writer and ultraviolet eraser are not required.
The PROTECT switch must be turned OFF to enable writing.

21.6.2 PROTECT switch operation

1. Preparing the operation tools
Set the PROTECT switch knob by using the tip of a pair of tweezers, a
precision screwdriver, or a tool with a tip width of approx. 0.8mm (0.04").
Do not use objects with round tips, as the round tip can easily slip off the
switch knob, possibly resulting in an incorrect setting.
2. Switch operation procedure
As shown in the figure below, the switch knob can be "pushed" or "pulled". When setting the switch, do not
set it in an intermediate position.
Push
direction

21.6.3 Precautions when setting and using the switch

• Leaving the switch knob at an intermediate position for an extended period can cause an equipment
failure.
386
Switch setting
tool
Switch case
Switch
knob
OFF ON
PROTECT
switch
Shape of tool tip
Tool tip
Pull
direction
OFF ON
21 Memory Cassette
21.6 PROTECT Switch
Good
Bad