Differences Between Specified Device Monitor Screen And Monitor/Test Screen; Program Example1 (When Monitoring/Testing A Timer) - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition

19.14.2 Differences between specified device monitor screen and monitor/test screen

The figure below shows differences between the specified device monitor screen and the monitor/test screen.
→ Refer to Subsection 19.14.5 for a display example of the specified device monitor screen.
-Specified Device Monitor Screen
When D1000 is specified
D 1 0 0 0
( S p e c i f i e d )
In the case of a specified device monitor
screen "specified" is displayed.

19.14.3 Program example1 (when monitoring/testing a timer)

In this program example, the device type to be displayed on the specified device monitor screen is set to
"timer (T)". Sets the device No. to "T10".
For testing the timer T10, turn ON M0 to enable the test operation.
In this program example, system information is assigned from D50 to D54 and from M50 to M64.
M8002
Initial pulse
Test operation
enable command
M0
→ Refer to Subsection 19.6.3 for a display example of the monitor/test screen.
3 2 7 6 7
MOV K50 D8300 System information (system No.1) is set at D50 to D54.
MOV K50 D8301 System information (system No.2) is set at M50 to M64.
MOV K5 D50 Sets the device type to "Timer".
MOV K10 D51 Sets the device No. to "T10".
M50 When M0 turns ON, the test operation for T10 is enabled.
END
19 Display Module (FX3G-5DM)
19.14 Specified Device Monitor Function
-Monitor/Test Screen
When D1000 is monitored
D 1 0 0 0 3 2 7 6 7
D 1 0 0 1
D 1 0 0 2
D 1 0 0 3
0
0
0
341
11
12
13
14
15
16
17
18
19
20