Input/Output Connectors - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
9.2.2

Input/output connectors

The input/output connectors of FX
83503.
Prepare the input/output cables, referring to the following tables.
1. Applicable products
Classification
Input/output extension blocks
2. Preparation of input/output connectors
1) Compliant connectors (commercially available connectors)
Use 20-pin (1-key) sockets conforming to MIL-C-83503.
In advance, make sure that no interference is caused with peripheral parts, such as the connector cover.
2) Input/output cables (our options)
Input/output cables with attached connectors are available.
Model names
FX-16E-500CAB-S
FX-16E-150CAB
FX-16E-300CAB
FX-16E-500CAB
FX-16E-150CAB-R
FX-16E-300CAB-R
FX-16E-500CAB-R
FX-A32E-150CAB
FX-A32E-300CAB
FX-A32E-500CAB
3) Connectors for making input/output cables by users (our options)
The users should prepare the electric wires and pressure bonding tool.
Model name and composition of input/output connector
FX -I/O-CON for flat cable
2C
FX -I/O-CON-S for bulk wire
2C
FX -I/O-CON-SA for bulk wire
2C
4) Certified connectors (commercially available connectors)
Connectors made by DDK Ltd. shown in Item 3).
128
Series input/output extension blocks (connector type) conform to MIL-C-
2N
FX 2N -16EX-C, FX
Length
5m(10'4") General-purpose input/output cable
1.5m(4'11")
3m(9'10") Cables for connecting FX Series terminal block
and input/output connector
5m(10'4")
For the connection with FX Series terminal block,
1.5m(4'11")
refer to the following chapter.
3m(9'10")
5m(10'4")
1.5m(4'11")
3m(9'10")
Cables for connecting A Series Model A6TBXY36
connector/terminal block conversion unit and
input/output connector type
5m(10'4")
Our model name
10-piece
set
5-piece
set
5-piece
set
9 Preparation for Wiring and Power Supply Wiring Procedures
2N -16EXL-C, FX 2N -16EYT-C
Description
→ [20. Terminal Block]
Details of part
(made by DDK Ltd.)
Solderless connector FRC2-A020-30S
Housing HU-200S2-001
Solderless contact HU-411S
Housing HU-200S2-001
Solderless contact HU-411SA
9.2 Cable Connecting Procedures
Model names
Shape
• Single wire (Wire color: red)
• PLC side: A 20-pin connector
• Flat cables (with tube)
• A 20-pin connector at both ends
• Round multicore cables
• A 20-pin connector at both ends
• Flat cables (with tube)
• PLC side: Two 20-pin connectors in 16-
point units.
• Terminal block side: A dedicated
connector
• One common terminal covers 32 input/
output terminals.
Applicable electric wire (UL-1061 are
recommended) and tool
Pressure bonding tool
Electric wire size
(made by DDK Ltd.)
2
357J-4674D: Main body
AWG28 (0.1mm ),
357J-4664N: Attachment
1.27 pitch, 20-core
2
) 357J-5538
AWG22 (0.3mm
2
) 357J-13963
AWG20 (0.5mm