Mitsubishi Electric MELSEC-F FX3G Series User Manual page 36

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
[Pulse output function]
When output terminals in the transistor output
type main unit are used, pulses of up to 100kHz
can be output simultaneously to 3 axes
Y001 and Y002).
*1. 2 axes (Y000 and Y001) in 14-point and
24-point type main units
Using a number of instructions programming is
simplified.
→ Refer to Positioning Control Edition.
[Various positioning instructions]
→ Refer to Positioning Control Edition.
Instruction
Mechanical zero return instruction with DOG
DSZR
search function
Instruction to read the current value from our
ABS servo amplifier with absolute position (ABS)
detecting function
Positioning (relative positioning) to specify the
DRVI
movement from the current position
Positioning (absolute positioning) to specify
DRVA the target position based on the current
value 0
Instruction to change the pulse train output
PLSV
frequency
Instruction for positioning based on batch
TBL setting of positioning operation, moving
distance and speed
3. Display functions (display module)
(Supported in Ver. 1.10 or later)
FX -5DM Display Module (option) can be
3G
incorporated in the PLC.
[Monitor/test function]
De v i ce s c a n b e m o ni t or ed an d t es t ed by
operating the buttons on the display module.
The button operations can be inhibited by the
user program.
[Other functions]
On the display module, you can set the time,
adjust the contrast and display the PLC version
and error codes.
→ Refer to 19. Display Module (FX3G-5DM) in
4. Communication and network functions
The expansion board, special adapter and
special function block for each communication
function can be connected.
[Kinds of communication functions]
• Programming communication
(RS-232C/RS-422/USB)
• N:N Network
• Parallel link
• Computer link
• Inverter communication
(Supported in Ver. 1.10 or later)
• Non-protocol communication
(Built-in RS-422/RS-232C/RS-485)
→ Refer to Data Communication Edition.
30
*1
(Y000,
Description
this manual.
• MODBUS communication
(Supported in Ver. 1.30 or later)
→ Refer to MODBUS Serial Communication
• Ethernet (Supported in Ver. 2.00 or later)
→ Refer to FX -ENET-ADP User's Manual.
3U
• CC-Link
- Master station (Compatible with CC-Link
Ver. 2.00 and Ver. 1.10):
FX -16CCL-M
3U
- Master station (Compatible with CC-Link
Ver. 1.10):
FX -16CCL-M
2N
- Intelligent device station:
FX -64CCL
3U
- Remote device station:
FX -32CCL
2N
→ Refer to the manual for each product.
• CC-Link/LT
- Master station: FX
- Remote I/O station, Remote device station
→ Refer to the manual for each product.
• AnyWireASLINK
- Master station: FX
- Slave station
→ Refer to the manual for each product.
*1. Note that the warranty, etc. on this
p r o d u c t d i f f e r s f r o m t h a t o n o t h e r
programmable controller products.
For details, refer to FX
User's Manual.
• PROFIBUS-DP
- Master station
- Slave station: FX
→ Refer to the manual for each product.
5. Analog functions
The expansion board, special adapter and
special function block for each analog function
are connected.
→ Refer to Analog Control Edition.
[Kinds of analog functions]
• Voltage/current input
• Voltage/current output
• Temperature sensor input (thermocouple and
platinum resistance thermometer sensor)
• Temperature control
2 Features and Part Names
2.1 Major Features
Edition.
-64CL-M
2N
*1
-128ASL-M
3U
-128ASL-M
3U
-32DP
3U