3. Technical data
Article number
Weight [g]
Overall height [mm]
Lamination ring height [mm]
Lamination ring diameter [mm]
4. Handling
4.1. Assembly
Clean the threads of the ball insert (10A31 adapter) and the terminal
device with acetone and let it evaporate. Next, apply a bit of 636K14
Loctite® 601 to the thread of the terminal device. Now screw the ball insert
onto the thread of the terminal device up to the stop.
NOTICE
Risk of damage as a result of improper adhesive handling. To
ensure a solid bond, the respective areas must be degreased with
acetone before applying the adhesive.
The degreased areas may no longer be touched and must be coated
with adhesive immediately after the acetone has dried.
INFORMATION
Follow all safety and processing instructions of the adhesive
manufacturer.
20
10V41 ROBO-WRIST
165
41
20
43.5