Explanation of symbols
WARNING
CAUTION
NOTICE
INFORMATION
INFORMATION
Please read these instructions for use carefully. Pay special
attention to the safety instructions!
1. Single components
1.1. Single components
For available single components refer to the catalogue.
1.2. Accessories
10V41 ROBO-WRIST
10A31 Ball insert to be screwed together with terminal devices. Enables
quick switching of terminal devices. Two adapters are included in
the 10V41 ROBO-WRIST scope of delivery. Additional adapters
can be ordered separately as accessories.
10A32 The two-part titanium adapter shown in Figure 3 is designed
to protect the ROBO-WRIST from strong strain and shock. It
offers additional safety during demanding activities by locking
the extension/flexion. Rotation is still possible in this case. This
adapter is not included in the scope of delivery of the 10V41
ROBO-WRIST and can be ordered separately.
2. Description
2.1. Intended use
The 10V41 ROBO-WRIST is to be used solely for the exoprosthetic fitting
of the upper extremities in combination with Ottobock arm components.
16
Warnings regarding possible risks of severe accident
or injury.
Warnings regarding possible risks of accident or injury.
Warnings regarding possible technical damage.
Additional information on the fitting/use.