Table of Contents
Advertisement
Notes regarding the document
1.3 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
1.4 General safety instructions
CAUTION
Damaged electronic components
Electric shock due to contact with live components
► Check the product for damage (e.g. cable, housing) prior to each use while in a de-energised state.
CAUTION
Mechanical damage to the product
Risk of injury, change in or loss of functionality
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness for use.
► In case of changes in or loss of functionality, do not continue using the product.
► Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's customer service,
etc.).
NOTICE
Contact with heat, embers or fire
Damage to the product due to high temperatures
► Keep the product away from open flames, embers and other sources of heat.
NOTICE
Operating the product outside of the permissible temperature range
Limited function due to product malfunction or damage
► Avoid operation in areas outside the permissible temperature range (section "Technical data" - see Page 49).
NOTICE
Use under unallowable environmental conditions
Damage to product due to unallowable environmental conditions
► Do not expose the product to unallowable environmental conditions.
► If the product has been exposed to unallowable environmental conditions, check it for damage.
► If damage is apparent or in case of doubt, do not continue using the product.
► Take suitable measures if required (e.g. cleaning, repair, replacement, inspection by the manufacturer or a
specialist workshop, etc.).
NOTICE
Penetration of dirt and moisture
Product damage, loss of functionality and malfunction due to penetrating substances
► Make sure that solid particles (e.g. dust), moisture (e.g. water vapour) and liquids cannot penetrate into the
product during transport, storage and use.
► Refer to the specifications regarding the ambient conditions in the "Technical data" (see Page 49) section
under the "Ambient conditions" heading.
6
743A250 Bionic Pro
Advertisement
Table of Contents
