Table of Contents
Advertisement
Figure 33. Installing air shroud
Next steps
1. If removed, install the full length PCIe cards.
2. If applicable,
install the GPU
3. If applicable, connect the cables to the NVDIMM-N battery.
CAUTION:
NVDIMM-N battery is not hot swappable. To prevent data loss and potential damage to your system,
ensure that your system, LEDs on system, LEDs on NVDIMM-N and LEDs on NVDIMM-N battery are turned off
before connecting the NVDIMM-N battery cables.
4. Follow the procedure listed in
Cooling fan assembly
Removing the cooling fan assembly
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Lift the release levers to unlock the cooling fan assembly from the system.
2. Hold the release levers, and lift the cooling fan assembly away from the system.
82
Installing and removing system components
cards.
After working inside your
Safety
instructions.
Before working inside your
system.
system.
Advertisement
Table of Contents
