Remove The Cooling Fan; Install The Cooling Fan - Dell EMC IDPA DP4400 Service Procedures

Remove and replace assemblies

Remove the cooling fan

Install the cooling fan

Dell EMC IDPA DP4400 Service Procedures
34
The procedure for removing standard and high performance fans is identical.
Before you begin
WARNING
Opening or removing the system cover when the system is on may expose you to
a risk of electric shock. Exercise utmost care while removing or installing cooling
fans.
CAUTION
The cooling fans are hot swappable. To maintain proper cooling while the system
is on, replace only one fan at a time.
Procedure
1. Press the release tab and lift the cooling fan out of the cooling fan assembly.
Figure 20 Removing cooling fan
The procedure for installing standard and high performance fans is identical.
Procedure
1. Holding the release tab, align the connector at the base of the cooling fan with
the connector on the system board.