Color Wheels; Color Wheel Type - Barco Balder Series User Manual

Image 2-10
Description
Name Pcs
DMX IN 1 DMX 512 input
DMX OUT 1 DMX 512 output
RS-232 1 9–pin DB9 connector
Sync 3 BNC Sync Port IN/OUT;
Bidirectional mini-DIN (1x 3D
sync Out, and 2x Sync In/Out)
Trigger 3 (one in 12VDC - 0,5A (6W)
front,
two on
rear
panel)
RC 1 Jack connector for wired
remote
USB 3 USB 2.0 type A, 4 pin( 2x Rear
and 1x Front)
LAN 1 Standard RJ45 connector
DP 2 Standard display port
DL-DVI-D 2 Dual DVI-I 1.0 (DVI_D
Functionallity).
HDMI 1 Standard HDMI 2.0
HDBaseT 1 Standard RJ45 8P8C
Connector
SDI 2 SDI1 is Input, SDI 2 is pass
through. (out)

2.11 Color Wheels

About
The Balder Projector is delivered with a standard Color wheel, that is suitable for most applications.
Other colorwheels are available upon request.
Consult Barco sales office or a service partner in order to find the most suitable colorwheel for the specific
application.

2.12 Color Wheel Type

Identifying the installed color wheel
The installed color wheel can be identified in the Home / Status menu.
Getting to know the projector.
Purpose
For Projector Control
For Projector Control
For Projector Control. Allows for wired remote
control and monitoring of many projector functions
used in installation environments
For Projector ControlThis is mainly used in multiple
projector installations with requirement of
synchronization between the units
For Controlling Peripherals, like motorized
screens, curtains etc. Give 12V output when
projector are switched on. NOTE Disconnect the
projector power cable before connecting or
removing the trigger cable
For Projector Control
For Software upgrade
For Projector Control
For Projector Input
For Projector Input. These connectors can also be
used to form one uniform image by feeding half of
the image into each connector. HDCP compliant
for sources up 165 Mhz
For Projector Input
For Projector Control
For Projector Input
601–0443 /03 Balder 29