Table of Contents
Advertisement
Input & Communication
LED Status
LED
PWR (power LED)
LIGHT (Illumination LED)
ERR (error LED)
IR
3.7 Laser Status
About the Laser Status Light
The Laser Status Light is located at the rear top of the projector (reference 2 Image 3-9). The Laser Status
Light is a real time indicator of the laser condition.
Image 3-9
Status overview
The Laser Status light has only one color: white. The combination of the Laser Status light and the backlight of
the Light button on the Local Keypad indicates a certain condition of the projector. See table below.
40
R5906151 /02
XDL
Color status
Off
RED
ORANGE
GREEN
Off
RED
GREEN
GREEN-ORANGE
Off
RED toggles on/off
ORANGE toggles on/off
RED
GREEN
Description
Projector powers up or has no
power
Projector is in Standby
Projector is Ready
Projector is on
Light source is off
No light source detected
Light source is on in normal mode
Light source is on in CLO mode
No error
Error
Projector is installing firmware
Warning
IR signal received
IR signal acknowledged
Advertisement
Table of Contents
