Checking The Status Of The Laser Banks - Barco F80 User Manual

Image 10–54 Advanced settings, Pixel shift
The Pixel Shift menu will be displayed.
Image 10–55 Example of the pixel shift menu
5. Use the Gain and Resonance sliders to fine tune the actuator until the center marker hits the bullseye.
Use Align both following images with the sliders available in this menu.
Image 10–56 The alternating XPR test pattern

10.15.7 Checking the status of the Laser Banks

About failing laser banks
The projector is powered by a laser light source, which has multiple laser banks. The light output and color
performance is dependant on the number of active laser banks.
If one or more laser banks have failed of a certain type, you will notice a decreased light input and decrease in
color performance. But the projector will keep on playing, unless too many banks of a certain color will have
failed.
In order to disable a certain laser bank, or calibrate the projector after disabling one or more laser
banks, please refer to the Projector Toolset User Manual.
How to check the status of the Laser Banks
1. In the main menu, navigate to Settings → Maintenance → Advanced, while using the service code to enter
the menu.
GUI – System Settings
R5906852 /06 F80 135