Removing Of The Picture Tubes; Procedure 3; Image 6 Mounting Screws (6X); Image 7 Remove Pcb Board - Barco R7628162K Installation Manual

Removing of the picture tubes

Procedure 3

To remove the picture tubes, follow the next procedure:
Image 6
mounting screws
(6x)
Image 7 remove
PCB board
BARCO ——————————————————— 8
Step Action
1 Loosen the end stage, deflection, focus,…
2 Remove PCB board at the end of the picture tube (4
screws)
3 Loosen the mounting screws on the top panel and lower
panel (will be reused)
4 Slide out the picture tubes
————————————— Projection Systems
Image
7
6