Installing and Connecting the Sensor
Available iVu Brackets
SMBIVURAL
Thread three M4 x 4mm screws through the bracket into the mounting holes in the bottom of the sensor. Tighten all three screws.
4
The iVu Plus BCR sensor requires a bracket for mounting. Three brackets are available
from Banner. The brackets allow the sensor to be mounted either perpendicular to the part
or at an adjustable angle.
SMBIVURAR
www.bannerengineering.com - tel: 763-544-3164
iVu Plus BCR Quick Start Guide
SMBIVUU
154722