Mitsubishi Electric CR800 Series Instruction Manual page 100

11 Teaching and Setting of Adjustment Variables ("1" program)
(3) Double-click the variable you want to change, and change the appropriate value for displayed in the "Edit
Position data".
For example, change to "-50" from "-30" the value of the Z-coordinate of the PUp1 :
(4) Click [OK] button,
"Variable Monitor".
(5) Return to the "11.3
implementing the automatic operation.
11-88 Adjustment of operating conditions
and confirm that was able to change the value of the variable that is specified in the
Automatic Operation", and then check to see whether the can be corrected by